Temporary edge protection systems manufactured to TS EN 13374 standards are products used to ensure occupational health and safety, particularly during construction work. Temporary edge protection systems create a safe working environment protecting personnel against falls throughout the process from the foundation stage of a site to its completion. Edge protection barriers used in a site environment stand out as a collective protection measure. Dekosi is a professional company that manufactures and supplies edge protection barriers that raise safety on construction sites to the highest level. We also continue to offer edge protection system solutions for exterior facade construction edge protection, stair railings and elevator fronts.
Temporary edge protection systems are used to prevent personnel working at height from being injured by falls. To ensure worker safety, these edge protection barriers must comply with standards. Thanks to these systems, which provide collective safety, creating a safe working environment becomes possible and minimising potential accidents becomes far easier.
There are some very important points to consider when buying a temporary edge protection system. Quality manufacturing and the materials used in producing the edge protection barrier are very important here. Important details include the edge protection system having a toe board sheet at the bottom, being framed, and being manufactured in accordance with TS EN 13374 standards. A choice must also be made between main guardrail, intermediate guardrail and toe board systems or intermediate protection (mesh, net, etc.) systems. While products such as toe boards and main guardrails are expressed as one of the fundamental requirements, the openings remaining between these two concepts must be more than 47 centimetres. It is therefore essential to determine which of the intermediate protection or intermediate guardrail systems (balustrade, safety net, mesh, etc.) will be preferred and to make a choice accordingly.
When choosing between temporary edge protection systems, products with counterfeit TS EN markings must be avoided. Because low-grade manufacturers in particular put temporary edge protection systems with counterfeit TS EN markings on the market, it is worth paying close attention to whether the product carries an embossed seal when you buy.
The nets to be used in the temporary edge protection system purchased must also meet the requirements of the TS EN 1263-1 standard. In addition, the net fixings must be able to meet the loading requirements of the guardrail classes set out in the TS EN 13372 standard. It is also among the essential criteria that these nets are tensioned so as to prevent slackness. The other details to note here can be listed as follows:
The material classification of temporary edge protection systems is another important detail to consider. Temporary edge protection systems within the scope of the TS EN 13374 standard are divided into three separate classes: Class A, Class B and Class C. Accordingly:
Temporary edge protection systems are highly functional products that create a safe working area in the building construction industry. With this equipment, personnel can carry out their work in a safe environment and projects can progress without problems. These edge protection products prevent workers from falling. Preferred especially on construction sites within residential areas to protect the safety of pedestrians, these products are a great saviour whenever safety must be ensured.
Temporary edge protection systems are used, primarily on building construction sites and in many other active working environments, to safeguard occupational and worker health and to create reliable working conditions at uncertain heights by filling openings. Even if including temporary edge protection systems during the construction stage does not entirely eliminate the risk of falling and injury, it creates a more reliable area within a potentially risky work zone. Workplace accidents that might otherwise result in very minor injuries can even result in death if the precautions required to ensure worker safety are not taken. Ensuring that the construction process is completed without workers being harmed therefore depends on supplying quality temporary edge protection systems.
Safety precautions in elevated and risky working environments protect the lives of the workers responsible for carrying out the work on the construction site. People outside the area can also be spared from being adversely affected in an accident. Temporary edge protection systems, which are very important for occupational and worker health and for creating a safe area, must always be given priority. Dekosi, which always takes international standards into account in the manufacture of temporary edge protection systems, allows you to obtain quality products in temporary edge protection barriers very easily thanks to its working system providing high safety and full protection. To obtain detailed information about collective protection measures through our company, which offers sensible and long-term solutions in every respect on this subject, you can contact our customer support team right away.
Temporary edge protection systems are protection products that prevent workers from falling, particularly on construction sites and in large industrial operations where work is intense and large-scale maintenance or repair is under way. There is always a possibility that personnel working in such places could suddenly fall through edge openings. Because such falls can result in serious injury, the temporary edge protection systems used should be chosen as effective products that minimise risks and ensure worker safety. Otherwise, unwanted accidents on building construction sites may be inevitable.
Temporary edge protection systems are highly functional products manufactured today in many different types and specifications. It is very important to pay attention to the material of the temporary edge protection system chosen in order to ensure safety in the long term. The classification features mentioned should therefore be analysed and edge protection systems suited to the needs of the area where the barrier will be used should be supplied. Dekosi has always managed to stay ahead of its competitors as a company that consistently manufactures temporary edge protection systems to a high quality. TS EN 13374 standards have been taken into account in all temporary edge protection systems and other product options manufactured by our company. Creating a safe and healthy working environment for personnel working in the building construction sector has therefore become easier.
To experience quality in temporary edge protection systems with Dekosi, our expert team maintains constant communication with project management, the design team and local managers. Identifying hazardous areas at the first stage through design work aimed at the needs of areas where there is a risk of falling, our company's staff reach a joint decision with the customer in order to take all the necessary precautions. Manufacturing of the temporary edge protection system then begins on a professional level. To experience Dekosi quality in the supply of temporary edge protection systems and to ensure occupational health and worker safety in the long term, you can visit our website right away and buy the products suited to your needs at attractive prices.
