Safety on construction sites is among the most critical factors for worker health and the sustainability of projects. Clamp-on edge protection systems, used to reduce the risk of falling to zero especially during work on upper floors, at slab edges and around shaft openings, are one of the most fundamental parts of modern site safety solutions. Thanks to their easy installation, mechanisms that adapt to different surface types in seconds and high load capacities, these systems are widely preferred as a legal requirement on today's professional construction projects.
To build a safe working area, complementary equipment such as clamp-on posts, barrier rails, screw-type systems, stanchions, uprights and protection panels are used together. These integrated solutions meet temporary edge protection requirements on construction sites at a corporate and professional level. Manufactured in full compliance with TS EN 13374 standards, Dekosi products in particular help you pass occupational safety inspections successfully while creating a maximum protection shield on your site. Choosing the right system both helps your projects progress quickly and without errors and raises worker safety to the highest level.
The architectural structure and structural requirements of every construction project differ. Accordingly, the edge protection solutions used also vary directly according to the physical conditions of the application area. Thanks to their practical installation structure, which requires no drilling or screwing, clamp-on mechanisms offer safe and flexible use at many different points on a construction site.
One of the greatest risk factors threatening life safety on high-rise projects is open slab edges facing the exterior facade. Clamp-on post systems added to your project in these areas are installed by clamping onto reinforced concrete surfaces or between ceiling and floor without causing any damage to the surface. Thanks to a practical screw mechanism and telescopic adjustment, these systems adapt in seconds to slabs of different thicknesses and to different floor heights, supporting workers to move fearlessly and at full efficiency along facade edges.
It is essential that these systems, which operate outdoors in harsh site conditions, are resistant to external conditions. Manufactured entirely using galvanised coating technology, our post and stanchion systems show superior resistance to corrosion, moisture and rust. This reduces the risk of deformation to a minimum even on large-scale projects lasting many years. If you are looking for a strong site safety barrier, these systems produced specifically for slab edges bring savings in time and labour to your project with the advantage of fast installation.
Elevator shafts and stairwell openings are among the most critical areas on construction sites — dark, confined and carrying the highest vertical risk of falling. Screw-type stanchion systems, preferred in these hazardous areas, meet temporary edge protection requirements in the safest possible way. The clamping mechanism, which grips reinforced concrete walls or beams with its strong jaws, develops unshakeable resistance to impact and human loads.
The barrier bases and durable upright components used in these sensitive applications take the structural stability of the system to its peak. The use of high-strength connection components is vitally important, especially at shaft openings where there is material handling traffic and heavy worker circulation. Manufactured by Dekosi from first-class raw materials, this safety equipment passes the toughest tests and offers your site the advantage of long service life.
Wide atrium openings, terraces and balcony edges included in the architectural design of buildings are areas that must not be left unprotected during the structural construction process. Clamp-on barrier systems lock easily onto parapet walls or slab fronts in these areas. Installed without spoiling the aesthetic appearance and without causing structural damage to building elements, these barriers help you reach your zero-accident target on your projects.
When planning the budget for your site, it is important to know that edge protection stanchion prices vary depending on the sheet thickness of the product, the mechanism type, the material quality and the order volume. In particular, when clamp-on post prices are determined, the quality of the steel used on the production line, the hot-dip galvanising that provides rust resistance and international safety certificates play the leading role.
Although quality systems manufactured in 100% compliance with legal regulations and TS EN 13374 standards may at first glance appear to cost more than standard products, they are the most profitable investment for your business in the long run thanks to the superior safety performance they offer and their reusable service life. Remember that a construction safety bollard system or a weak barrier base made from poor-quality material, with weak welds and unable to withstand heavy loads, can create irreparable legal and financial liabilities in the event of an accident on your site.
Although low-cost, low-grade products may seem attractive as short-term solutions, systems that quickly deform in a site environment will create additional costs for you again on your next projects. At Dekosi, we combine a budget-friendly pricing policy with industrial quality and offer the most competitive price quotations with the advantage of selling directly from manufacturer to customer.
When reviewing occupational safety solutions in the construction industry, choosing the right brand is directly related to human life and to your corporate reputation. With the new-generation clamp-on edge protection technologies it has developed specifically for professional building projects, Dekosi offers durable, certified and sensible solutions for your sites. Manufactured to the highest quality standards, our clamp-on posts, robust screw-type stanchions, high-strength barrier bases, long-lasting uprights and highly visible construction safety bollard systems have a flexible structure that can be quickly adapted to any architectural project.
The hot-dip galvanised coating technology included as standard in the Dekosi product range ensures your products retain their original strength even in the harshest site conditions — in mud, rain and sun. The intelligent telescopic adjustment mechanisms allow your site personnel to complete assembly and dismantling within minutes without needing any extra hand tools. This practicality shortens labour times on your projects while also maximising logistical efficiency on site.
To receive full marks in legal inspections on your sites, to offer your workers a safe working environment and to complete your projects on time with zero accident risk, you should use professional equipment. Contact our expert sales team right away to review the world-standard temporary edge protection equipment manufactured with the Dekosi guarantee, to get a price quotation for the quantities specific to your project and to place your order. Build a safe future with Dekosi quality!
